LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Off-Vehicle Repair Instructions >> Transmission Fluid Pan Installation

Transmission Fluid Pan Installation

    Fig 1: View Of Transmission Oil Pan, Gasket & Bolts
    GM1499979Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: You may reuse the transmission oil pan gasket (29).
  1. Install the transmission oil pan gasket (29).
  2. Install the transmission oil pan magnet (30) into the transmission oil pan (28).
    3. NOTE: Position the wiring harness properly when installing the transmission oil pan or it may be crushed between the valve body and the oil pan.
  3. Install the transmission oil pan (28).
    4. NOTE: Refer to Fastener Notice.
  4. Install the transmission oil pan bolts (27).

    Tighten:  Tighten the bolts to 24 N.m (18 lb ft).

scientia non olet · About LEMON Manuals