Output Shaft Seal Removal

Tools Required

• J 6125-1B  Slide Hammer
• J 23129  Universal Seal Remover. See Special Tools .

Fig 1: Identifying Output Shaft Seal Retainer Ring
Courtesy of GENERAL MOTORS CORP.
1. Remove the output shaft seal retainer ring (14).
2. Inspect the output shaft seal retainer ring (14) for damage.
Fig 2: Removing Output Shaft Seal
Courtesy of GENERAL MOTORS CORP.
3. Using the J 23129  and the J 6125-1B  , remove the output shaft seal (13). See Special Tools .