LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Off-Vehicle Repair Instructions >> Low and Reverse Band Servo Assembly Removal

Low and Reverse Band Servo Assembly Removal

    Fig 1: View Of Low And Reverse Band Servo Cover
    GM28388Courtesy of GENERAL MOTORS CORP.
  1. Remove the low and reverse band servo cover bolts (61).
  2. Remove the low and reverse band servo cover (62).
  3. Remove the low and reverse band servo cover gasket (63).
  4. Inspect the low and reverse band servo cover (62) for damage.
    5. Fig 2: Locating Low And Reverse Accumulator Piston Spring
    GM28389Courtesy of GENERAL MOTORS CORP.
  5. Remove the low and reverse band servo assembly (64-73).
  6. Remove the low and reverse accumulator piston spring (74) from the transmission case.
  7. Inspect the low and reverse band servo transmission case bore for wear and scoring.
  8. Inspect the low and reverse accumulator piston spring (74) for distortion.
scientia non olet · About LEMON Manuals