LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Off-Vehicle Repair Instructions >> 4th Clutch Assembly Removal

4th Clutch Assembly Removal

    Fig 1: Identifying Fourth Clutch Housing
    GM334757Courtesy of GENERAL MOTORS CORP.
  1. Verify the torque of the fourth clutch housing bolt (26). The torque should be 23 N.m (17 lb ft) minimum.
  2. NOTE: Discard the fourth clutch housing bolt (26) after removal. Damage could result to the fourth clutch housing (529) if the bolt is reused.
  3. Remove the fourth clutch housing bolt (26).
  4. Remove the fourth clutch housing (529) from the transmission case assembly.