LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Diagnostic Information And Procedures >> Symptoms - Automatic Transmission

Symptoms - Automatic Transmission

Symptoms - Automatic Transmission

Diagnostic Category Diagnostic Information
The following table consists of eight diagnostic categories that are located in the left-hand column. Using this column, choose the appropriate category based on the operating conditions of the vehicle or transmission. After selecting a category, use the right-hand column to locate the specific symptom diagnostic information.
Fluid Diagnosis: 
This category contains the following topics:
  • Fluid condition - appearance, contaminants, smell, overheating
  • Line pressure - high or low
  • Fluid leaks
 
Noise and Vibration Diagnosis: 
This category contains the following topics:
  • Noise - drive gear, final drive, whine, growl, rattle, buzz, popping
  • Vibration
 
Range Performance Diagnosis: 
This category contains the following topics:
  • Drives in Neutral
  • No Park/Neutral
  • No Reverse
  • Engine stalling
  • No Drive
  • No engine braking
  • No or incorrect gear selection
  • Shift selector indicator does not match transmission gear range
 
Shift Quality - Feel - Diagnosis: 
This category contains the following topics:
  • Erratic shifts
  • Harsh, soft, delayed or slipping shifts
  • Harsh, soft, or delayed engagement
 
Shift Pattern: 
This category contains the following topics:
  • One forward gear missing or slipping
  • One forward gear only
  • Two forward gears only
  • Non-First gear start
 
Shift Speed Diagnosis: 
This category contains the following topic:
Inaccurate or inconsistent shift points
 
Refer to Inaccurate Shift Points .
Torque Converter Diagnosis: 
This category contains the following topics:
  • Torque Converter Diagnosis
  • TCC does not apply
  • TCC does not release
  • TCC apply/release quality
  • Poor acceleration/No torque multiplication
  • Converter Ballooning
  • Engine Stall
 
Symptom not found or no symptom detected