Overdrive Range, 4-3 Downshift: Notes

In order to obtain the 4-3 downshift, the PCM receives an input signal from the TP Sensor at increased throttle openings. This causes the PCM to de-energize the 1-2 Shift Solenoid (SS) Valve.

1-2 Shift Solenoid (1-2 SS) Valve

When the 1-2 SS valve is de-energized, 1-2 signal fluid exhausts at the solenoid valve. This allows spring force to move the 3-4 shift valve to the extreme right.

3-4 Shift Valve

The fourth clutch apply pressure is shut off and a port is opened at the valve. This exhausts the fourth clutch fluid, which exits the fourth clutch and the fourth clutch accumulator. The fourth clutch releases, shifting the transmission into third gear.

Fourth Clutch

Fluid which exhausts from the fourth clutch unseats the #10 checkball. This allows for a rapid exhausting of the fourth clutch apply fluid at the 3-4 shift valve.

Fourth Clutch Accumulator

Fluid which exhausts from the fourth clutch accumulator also exhausts through the unseated #10 check valve and exhausts at the 3-4 shift valve.