LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine Mechanical - 4.8L, 5.3L, And 6.0L (2 Of 4)) >> On-Vehicle REPARI Instructions >> Engine Mount Bracket Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Engine Mount Bracket Mounting Nuts
    GM829676Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount bracket to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the engine mount bracket retaining nuts.

    Tighten:  Tighten the nuts to 45 N.m (33 lb ft).

  3. Lower the engine.
    4. Fig 2: Identifying Engine Mount To Engine Mount Bracket Bolts
    GM829685Courtesy of GENERAL MOTORS CORP.
  4. Install the engine mount to the engine mount bracket bolts.

    Tighten:  Tighten the bolts to 60 N.m (44 lb ft).

  5. Lower the vehicle.
scientia non olet · About LEMON Manuals