LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> On-Vehicle Repair Instructions >> Tow/Haul Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Tow/Haul Switch Clips
    GM1461714Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  2. Disconnect the electrical connector from the tow/haul switch.
  3. Push in clips (1) on both sides of the switch.
  4. Push the switch rearward to remove the switch from the trim.
scientia non olet · About LEMON Manuals