LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Instructions >> Input Carrier Inspection

Input Carrier Inspection

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Input Carrier Pinion End Play Measurements
    GM735074Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Check end play on each pinion. Clearance is the same for 4 or 5 pinion design.
  1. Check the input carrier pinion end play. The end play must not exceed 0.61 mm (0.024 in).
  2. Inspect the input carrier for pinion gear damage, proper pin stake and keystoned pinion gears. Pinions must rotate freely.