LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.3L) >> Repair Instructions - On Vehicle >> Engine Mount Adapter Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Mount Adapter Mounting Bolts
    GM829668Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount adapter.
    2. NOTE: Refer to Fastener Notice .
  2. Install the engine mount adapter mounting bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the engine mount. Refer to Engine Mount Replacement - Left Side  or Engine Mount Replacement - Right Side .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals