LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.3L) >> Repair Instructions - On Vehicle >> Engine Flywheel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Flywheel & Bolts
    GM188130Courtesy of GENERAL MOTORS CORP.
  1. Install the engine flywheel to the crankshaft.
  2. Align the locator hole to the pin.
    3. Fig 2: Identifying Flywheel Bolt Tightening Sequence
    GM63174Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the engine flywheel bolts.

    Tighten:  Tighten the engine flywheel bolts in sequence to 100 N.m (74 lb ft).

  4. Install the transmission assembly. Refer to Transmission Replacement .
scientia non olet · About LEMON Manuals