LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.3L) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Releasing Drive Belt Tension
    GM374176Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the retaining bolt for the coolant recovery reservoir and set the reservoir aside.
  3. Install a 3/8 inch drive wrench on the drive belt tensioner arm and rotate the arm counterclockwise.
  4. Remove the drive belt.
  5. Slowly release the tension on the drive belt tensioner arm.
scientia non olet · About LEMON Manuals