LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.3L) >> Repair Instructions - On Vehicle >> Drive Belt Idler Pulley Replacement - without Air Conditioning >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Locating Drive Belt Idler Pulley Bolt (W/O Air Conditioning)
    GM338506Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (4.3L, 4.8L, 5.3L, 6.0L)
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the belt idler pulley bolt.
  4. Remove the belt idler pulley from the power steering pump mounting bracket.