LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.3L) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Crankshaft Front Oil Seal
    GM357566Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the exterior of the crankshaft front oil seal with clean engine oil.
  2. Use the J 35468  with a hammer in order to install the crankshaft front oil seal. See Special Tools .
  3. Inspect to ensure the crankshaft front oil seal is flush and square to the engine front cover.
  4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals