Water Pump Removal

Tools Required 

J 41240  Fan Clutch Remover and Installer

Fig 1: View Of Fan, Water Pump Pulley & Bolts
Courtesy of GENERAL MOTORS CORP.
1. Remove the bolts and the fan and water pump pulley using the J 41240  .
Fig 2: View Of Water Pump Inlet Hose & Clamps
Courtesy of GENERAL MOTORS CORP.
2. Remove the clamps and the water pump inlet hose.
Fig 3: View Of Water Pump & Bolts
Courtesy of GENERAL MOTORS CORP.
3. Remove the water pump bolts.
4. Remove the water pump.
5. Remove the water pump gaskets.
6. Discard the water pump gaskets.