LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.3L) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearings Cleaning and Inspection >> Measuring Connecting Rod Bearing Side Clearance

Measuring Connecting Rod Bearing Side Clearance

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Measuring Connecting Side Clearance
    GM5163Courtesy of GENERAL MOTORS CORP.
  1. Insert a feeler gage between the connecting rod caps and measure the connecting rod side clearance. The proper connecting rod side clearance specification is 0.15-0.44 mm (0.006-0.017 in).
  2. Connecting rod side clearances may also be measured with a dial indicator set.
scientia non olet · About LEMON Manuals