Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
If you cannot duplicate the condition, operate the vehicle within the conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records.
- Command the EGR valve to 10 percent. The EGR Position Variance parameter should remains less than 3 percent.
- Engine running, observe the DTC information with a scan tool. DTC P046C should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame Records data.