Diagnostic Aids
WARNING: This page is about a different variant/trim than selected.
- Excessive vibration from sources other than the engine could cause DTC P0300 to set. The following are possible sources of vibration:
- Variable thickness brake rotors-Refer to Symptoms - Hydraulic Brakes .
- Drive shaft not balanced-Refer to Vibration Analysis - Driveline .
- Worn or damaged accessory drive belt-Refer to Symptoms - Engine Mechanical .
- There may be more or less cylinders actually misfiring than indicated by the scan tool.
- Spray water on the secondary ignition components using a spray bottle. Look and listen for arcing or misfiring.