Conditions for Running the DTC

Without RPO JL4

• DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0128, P0200, P0442, P0446, P0452, P0453, P0455, P0496, P1258 are not set.
• The Ignition 1 Signal parameter is between 10-18 volts.
• The Engine Run Time parameter is more than 300 seconds.

With RPO JL4

• DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0128, P0169, P0178, P0179, P0200, P0220, P0442, P0446, P0452, P0453, P0455, P0496, P1125, P1258, P1516, P2101, P2108, P2135, U0107 are not set.
• The Ignition 1 Signal parameter is between 10-18 volts.
• The Engine Run Time parameter is more than 300 seconds.