Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
If you cannot duplicate the condition, operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records.
- Turn ON the ignition and observe the Fuel Temperature Sensor parameter with a scan tool. The fuel temperature parameter should be within the operating range.
- Engine running, observe the DTC information with a scan tool. DTCs P0182 or P0183 should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame Records data.