LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Multifunction Alarm Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Multifunction Alarm Module & Electrical Connector
    GM895364Courtesy of GENERAL MOTORS CORP.
  1. Remove the driver side knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement .
  2. Disconnect the multifunction audio alarm module (2) electrical connector (1).
  3. Remove the multifunction audio alarm module (2) from the vehicle.
scientia non olet · About LEMON Manuals