LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Multifunction Alarm Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Multifunction Alarm Module & Electrical Connector
    GM895364Courtesy of GENERAL MOTORS CORP.
  1. Install the multifunction audio alarm module (2) to the mag beam.
  2. Connect the electrical connector (1) to the multifunction audio alarm module (2).
  3. Install the driver side knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement .
scientia non olet · About LEMON Manuals