Upper and Lower Valve Bodies Disassemble

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Control Valve Upper & Lower Body Assemblies & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Bolt M5 x 36 (Quantity: 12)
2	Bolt M5 x 45 (Quantity: 5)
3	Bolt M5 x 55
4	Control Valve Lower Body Assembly Tip: Separate the upper and lower valve bodies by carefully prying at the point indicated. Refer to Control Valve Lower Body Assembly Cleaning and Inspection .
5	Control Valve Body Spacer (w/Gasket) Plate Assembly NOTE: Do not use the old spacer plate. Install a NEW spacer plate. Reusing an old spacer plate may cause internal transmission leaks and transmission damage.
6	Control Valve Body Ball Check Valve (Quantity: 7) Tip: Note the position of the ball check valves.
7	Control Valve Upper Body Assembly Tip: Refer to Control Valve Upper Body Assembly Cleaning and Inspection .