LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Avalanche 5.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 893 (Automatic Transmission - 6L50/6L80/6L90 - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> 4-5-6 Clutch Overhaul (6L80) >> 4-5-6 Clutch Plates Installation

4-5-6 Clutch Plates Installation

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of 4-5-6 Clutch Plate Assembly & Components
GM1555341Courtesy of GENERAL MOTORS CORP.
4-5-6 Clutch Plates Installation

Callout Component Name
1 4-5-6 Clutch (Waved) Plate
2 4-5-6 Clutch Plate (Quantity: 6)
3 4-5-6 Clutch Plate Assembly (Quantity: 6)
4 4-5-6 Clutch Backing Plate
5 4-5-6 Clutch Backing Plate Retaining Ring
Tip:  After the retaining ring is installed, determine clutch piston travel in order to verify if the correct selective retaining ring is being used. Refer to 4-5-6 Clutch Backing Plate Retaining Ring Measurement .