4-5-6 Clutch Dampener Overhaul

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of 4-5-6 Clutch Dampener & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	4-5-6 Clutch Dampener Retaining Ring NOTE: Ensure the retaining ring is fully seated when installed. Using a screwdriver, fully seat the retaining ring into the groove by pushing on the inside diameter around the whole circumference. If the retaining ring is not fully seated, transmission damage will result.
2	4-5-6 Clutch Dampener Apply Plate
3	4-5-6 Clutch Dampener Tip: Dry and inspect the clutch dampener for the following conditions: Pitting Flaking Delamination Wear Glazing Cracking