2-6 Clutch Piston Replacement
WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
2-6 Clutch Piston Replacement
| Callout | Component Name |
|---|---|
| 1 | 2-6 Clutch Spring Retaining Ring Tip: Ensure the DT 47761 is centered over the clutch spring. See Special Tools . Special Tool: DT 47761 Clutch Spring Compressor. See Special Tools . |
| 2 | 2-6 Clutch Spring
NOTE:
Ensure the spring tabs are facing down during installation and that the tabs fit between the teeth on the piston. Failure to do so may cause damage to the clutch assembly.
|
| 3 | 2-6 Clutch Piston Assembly Tip: It may be necessary to apply air to the apply passage in order to unseat the piston. |