Tools Required

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

J 36850 Transjel® Lubricant

Fig 1: View Of Overrun Clutch Housing Thrust Washer & Overrun Clutch Housing Assembly

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Be sure the overdrive assembly is fully engaged and is level with the fourth clutch housing.

Install the turbine shaft and overdrive assembly into the transmission case.
Install the overrun clutch housing thrust washer (218) onto the overrun clutch housing assembly (504). Retain with J 36850 or equivalent.

Fig 2: Checking Overrun Clutch Housing Thrust Washer Surface

Courtesy of GENERAL MOTORS CORP.

Place a straight edge from the oil pump mating surface to the overrun clutch housing thrust washer (218). The 2 surfaces should be flush.