Third and Fourth Clutch Accumulator Housing Assemble
WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
- Install the 3rd clutch accumulator piston inner (406) and outer (404) seals. Lubricate the seals (404, 406) with DEXRON®VI automatic transmission fluid.
- Install the 3rd clutch accumulator piston (405) into the 3rd and 4th clutch accumulator housing (51).
- Install the 4th clutch accumulator piston seal (404). Lubricate the seal (404) with DEXRON®VI automatic transmission fluid.
- Assemble the 4th clutch accumulator piston pin (408) with the 4th clutch accumulator piston (407).
- Install the 4th clutch accumulator piston assembly.
- Install the 4th clutch accumulator piston pin retainer ring (402).