Underhood Electrical Center or Junction Block Replacement
Underhood Electrical Center or Junction Block Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Disconnect the battery. Refer to Battery Disconnect Caution . |
|
| 1 | Engine Harness Junction Block Cover |
| 2 | Engine Harness Junction Block Tip: Release the retainers securing the junction block to the bracket. |
| 3 | Screws, Engine Harness Junction Block Bracket (Qty: 3)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 4 | Engine Harness Junction Block Bracket |