Radiator Support Replacement

Fig 1: View Of Radiator Support, Mount Bolts & Mount Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front fascia. Refer to Front Bumper Fascia Replacement (Yukon) or Front Bumper Fascia Replacement (Escalade) or Front Bumper Fascia Replacement (Tahoe) or Front Bumper Fascia Replacement (Avalanche) or Front Bumper Fascia Replacement (Z71) . Remove the grille support. Refer to Support Replacement - Radiator Grille Reinforcement . Remove the front fascia bracket. Refer to Fascia Support Bracket Replacement - Front Upper . Remove the hood latch. Refer to Hood Latch Replacement . Remove the radiator. Refer to Radiator Replacement . Remove the A/C condenser. Refer to Condenser Replacement . Remove the fender bolts. Refer to Front Fender Replacement - Left Side and Front Fender Replacement - Right Side .
1	Radiator Support Mount Nuts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 70 N.m (50 lb ft)
2	Radiator Support Mount Bolts (Qty: 2) Tighten: 70 N.m (50 lb ft)
3	Radiator Support