LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Avalanche 5.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Latch Release Cable Replacement

Hood Latch Release Cable Replacement

Fig 1: View Of Hood Latch Release Cable & Nut
GM1670885Courtesy of GENERAL MOTORS CORP.
Hood Latch Release Cable Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the headlamps. Refer to Headlamp Replacement (Non HID) or Headlamp Replacement (Yukon) or Headlamp Replacement (Tahoe, Avalanche) or Headlamp Replacement (Cadillac Escalade) .
  2. Remove the grille support. Refer to Support Replacement - Radiator Grille Reinforcement .
  3. Remove the hood release handle. Refer to Hood Latch Release Handle Replacement .
1 Hood Latch Release Cable Nut
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)
2 Hood Latch Release Cable
Tip: 
  • Release the cable from the latch assembly and pull through the dash panel.
  • Attach mechanics wire to existing cable to ease installation of the new cable.
scientia non olet · About LEMON Manuals