Transmission Fluid Pan Installation

IMPORTANT: You may reuse the transmission oil pan gasket (29).

Fig 1: View Of Transmission Oil Pan, Gasket & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the transmission oil pan gasket (29).
Install the transmission oil pan magnet (30) into the transmission oil pan (28).

NOTE: Position the wiring harness properly when installing the transmission oil pan or it may be crushed between the valve body and the oil pan.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the transmission oil pan bolts (27).
Tighten: Tighten the bolts to 24 N.m (18 lb ft).