LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 4.3L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft and Bearings Removal

Crankshaft and Bearings Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Crankshaft Bearing Caps
    GM334329Courtesy of GENERAL MOTORS CORP.
  1. Mark or identify the crankshaft bearing cap locations, direction, and positions for assembly.
  2. Remove the crankshaft bearing cap bolts and discard.
  3. Remove the crankshaft bearing caps.
    4. Fig 2: View Of Crankshaft
    GM334336Courtesy of GENERAL MOTORS CORP.
  4. Remove the crankshaft.
    5. Fig 3: View Of Crankshaft Bearings & Crankshaft Bearing Caps
    GM334342Courtesy of GENERAL MOTORS CORP.
  5. Remove the crankshaft bearings from the crankshaft bearing caps.
    6. Fig 4: View Of Crankshaft Bearings At Engine Block
    GM334338Courtesy of GENERAL MOTORS CORP.
  6. Remove the crankshaft bearings from the engine block.
scientia non olet · About LEMON Manuals