LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Engine Mechanical - 6.6L - Off Vehicle Repair Instructions (1 Of 3)) >> Off-Vehicle Repair Instructions (Part 1) >> Drive Belt Tensioner and Generator Mounting Bracket Removal

Drive Belt Tensioner and Generator Mounting Bracket Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the electrical harness clip bolts.
    Fig 1: View Of Electrical Harness Clip Bolts
    GM1334907Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt tensioner bolt.
  3. Remove the drive belt tensioner.
    Fig 2: View Of Drive Belt Tensioner
    GM1334909Courtesy of GENERAL MOTORS CORP.
  4. Remove the drive belt tensioner and generator mounting bracket bolts.
    Fig 3: View Of Generator Mounting Bracket
    GM1334912Courtesy of GENERAL MOTORS CORP.
  5. Remove the drive belt tensioner and generator mounting bracket.
scientia non olet · About LEMON Manuals