Rear Side Door Hinge Replacement (Crew Cab)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Side Door Hinge & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Side Door Hinge Upper Bolt (Qty: 2) NOTE: Fastener Notice . Tighten: 25 N.m (18 lb ft)
2	Rear Side Door Hinge Upper Bolt (Qty: 2) Tighten: 25 N.m (18 lb ft)
3	Rear Side Door Upper Hinge Tip: Check the door for proper alignment, then adjust as necessary.
4	Rear Side Door Hinge Lower Bolt Tip: After installation of the replacement upper hinge, from the underside of the hinge, remove the temporary keeper pivot bolt and replace with longer permanent bolt. Tighten: 25 N.m (18 lb ft)
5	Rear Side Door Hinge Lower Bolt (Qty: 2) Tighten: 25 N.m (18 lb ft)
6	Rear Side Door Hinge Lower Bolt (Qty: 2) Tighten: 25 N.m (18 lb ft)
7	Rear Side Door Lower Hinge Tip: Check the door for proper alignment, then adjust as necessary.