LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1968 (Automatic Transmission - 6L80/6L90 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Propeller Shaft Front Slip Yoke Oil Seal Replacement (Two Wheel Drive)

Propeller Shaft Front Slip Yoke Oil Seal Replacement (Two Wheel Drive)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Output Shaft Seal Replacement
GM1822785Courtesy of GENERAL MOTORS COMPANY
Propeller Shaft Front Slip Yoke Oil Seal Replacement (Two Wheel Drive)

Callout Component Name

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the propeller shaft. Refer to Rear Propeller Shaft Replacement .
1 Propeller Shaft Front Slip Yoke Oil Seal

Special Tools

  • DT-48021  Seal Installer (6L90)
  • GE-8092  Driver Handle (6L90)
  • J 38869  Output Shaft Seal Installer (6L80)
  • J 45000  Seal Remover