LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1967 (Transfer Case - Mp 3023/3024 (NQH)) >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Transfer Case Rear Case Half Removal

Transfer Case Rear Case Half Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Transfer Case Halves, Bracket & Bolts
GM1849346Courtesy of GENERAL MOTORS COMPANY
Transfer Case Rear Case Half Removal

Callout Component Name
1 Transfer Case Bolts (Qty: 17)
2 Transfer Case Bracket
3 Transfer Case Rear Case Half
CAUTION:

Refer to Machined Surface Damage Caution .

NOTE:
  • Use opposing pry bars at casting bosses to spread the case.
  • Use snap ring pliers to release the transfer case rear output shaft outer retaining ring from the transfer case rear output shaft rear bearing assembly.
scientia non olet · About LEMON Manuals