1-2-3-4 Clutch Piston Housing Inspection
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the 1-2-3-4 clutch housing (1) for damage. Replace the housing if damage is present.
- Make sure that the orifice in the 1-2-3-4 clutch housing is not restricted. Clean any debris that is restricting the orifice.
- Measure the orifice in the 1-2-3-4 clutch housing for the specified size. Replace the housing if the specification is not met.
Specification: The 1-2-3-4 clutch housing orifice size is 0.85-1.15 mm (0.033-0.045 in).