LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1629 (Engine Mechanical - Hybrid (Hp2) 6.0L (LZ1)) >> Repair Instructions - On Vehicle >> Drive Belt Tensioner Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Drive Belt Tensioner
    GM1959995Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt tensioner (2).
  2. Install the drive belt tensioner bolts (1).
    3. CAUTION: Refer to Fastener Caution .
  3. Tighten the drive belt tensioner bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  4. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals