LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1614 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Auxiliary Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Auxiliary Oil Cooler Bolts & Push Pins
    GM711677Courtesy of GENERAL MOTORS CORP.
  1. Remove the front grill assembly. Refer to Radiator Grille Replacement (Chevrolet) or Radiator Grille Replacement (GMC) or Radiator Grille Replacement (Chevrolet HD) or Radiator Grille Replacement (GMC HD) .
  2. Place a drain pan under the vehicle.
  3. Disconnect the transmission oil cooler lines from the auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  4. Remove the auxiliary oil cooler bolts (1) and push pins (2).
  5. Remove the auxiliary oil cooler from the vehicle.
scientia non olet · About LEMON Manuals