Removal Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the oil level sensor.
- Remove the lower oil pan bolts.
- Separate the lower oil pan from the upper oil pan using J 37228 . See Special Tools .
- Remove the lower oil pan.
IMPORTANT:
Do not damage the sealing surfaces when separating the lower oil pan from the upper oil pan.