LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L (3 Of 5)) >> Repair Instructions - Off Vehicle (1 Of 3) >> Engine Coolant Air Bleed Pipe and Hole Cover Removal (RPO LY2/LY6/L9H)

Engine Coolant Air Bleed Pipe and Hole Cover Removal (RPO LY2/LY6/L9H)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Coolant Air Bleed Pipe
    GM1403313Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine coolant air bleed pipe bolts (309).
  2. Remove the pipe (307) with seals (308).
    3. Fig 2: View Of Coolant Air Bleed Pipe Seal
    GM1552485Courtesy of GENERAL MOTORS CORP.
  3. Remove the seals (308) from the pipe.
  4. Discard the seals.
scientia non olet · About LEMON Manuals