P0742 Condition 3 Accel/Decel/Accel Condition
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
This DTC will set when the TCC is commanded off when an output acceleration event is followed by an output deceleration event and followed by another output acceleration and the expected converter slip is not observed. An output acceleration event occurs when output shaft acceleration is greater than 40 RPM/second for greater than 4 seconds. An output deceleration event occurs when output shaft acceleration is -40 RPM/second for greater than 2.5 seconds.