LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1364 (Engine Controls And Fuel - 6.6L - Troubleshooting & Diagnosis) >> Charge Air Cooler Diagnosis (Full System Air Leak Test) >> Turbocharger Exhaust Pipe Connection

Turbocharger Exhaust Pipe Connection

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Charge Air Cooler Warning .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the catalytic converter. Refer to Catalytic Converter Replacement (With LU3) or Catalytic Converter Replacement (With V8 Engine) or Catalytic Converter Replacement (With LMM) .
  3. NOTE:
    • An improperly seated J 46091-15:  Test Adapter will cause an excessive air leak and hissing noise.
    • An early version of the J 46091-15:  Test Adapter has a quick-connect air fitting installed in the center of the adaptor. Remove the quick-connect air fitting and install a 1/8 pipe plug.
  4. Install the J 46091-15:  Test Adapter with the exhaust pipe clamp to the turbocharger exhaust pipe using the clamp from the catalytic converter.