Charge Air Cooler Outlet Connection (Engine Air Intake COLD Side)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not necessary to remove the charge air cooler from the vehicle to perform this test.
- Refer to Intake Air Heater Replacement for intake air heater removal.
- Install the J 46091-5: Charge Air Cooler Tester Adapter plate and gaskets on the inlet tube studs.
- Install the 2 intake air heater nuts and tighten the nuts to 8 N.m (70 lb in).
CAUTION:
Refer to Fastener Caution
.