Input Shaft Oil Seal Removal

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Illustrating Proper Input Shaft Oil Seal Installation

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Input Shaft Oil Seal CAUTION: Refer to Machined Surface Damage Caution . Procedure Drill a pilot hole, as required, and insert a self-tapping screw into the body of the seal. Use a plier or slide hammer type tool to remove the seal from the bore.