Mp3024 ATC
WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- The input shaft pilot bearing assembly (5) is larger than the MP 3023 ATC in order to accommodate the larger rear output shaft (19). The bearing outer diameter measures 41.275 mm (1.625 in).
- An input shaft pilot bearing retaining ring (6) is used.
- The high/low clutch (9) has neutral pointing engagement teeth. The leading edges of the teeth are symmetric.
- The rear output shaft (19) is larger than the MP 3023 ATC.
- The front output shaft drive sprocket (21) is 33.5 mm (1.319 in) wide.
- The front output shaft driven sprocket (34) is 35.5 mm (1.398 in) wide.
- The rear output shaft rear bearing retaining rings (27 and 29) are larger than the MP 3023 ATC. The inner diameter of the ring groove at the rear output shaft measures 38.5 mm (1.516 in).
- The rear output shaft rear bearing assembly (28) inner diameter measures 41 mm (1.614 in). The width measures 18 mm (0.709 in).
- The rear output shaft bearing assembly surface on the rear output shaft (19) measures 41 mm (1.614 in).