MP3023 LD ATC (common with either 27T or 32T input shaft spline)

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The input shaft pilot bearing assembly (5) is smaller than the MP 3024 ATC in order to accommodate the smaller rear output shaft (19). The bearing outer diameter measures 38.1 mm (1.5 in).
The rear output shaft (19) is smaller than the MP 3024 ATC.
The front output shaft drive sprocket (21) is 27.2 mm (1.071 in) wide.
The front output shaft driven sprocket (34) is 29.4 mm (1.157 in) wide.