Circuit/System Description

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The drive motor generator battery control module is also referred to as the battery energy control module (BECM). The BECM will diagnose its own systems and determine when a fault condition is present. Diagnostics and system status is communicated from the BECM to the hybrid powertrain control module (HPCM) through serial data. The HPCM is the host controller for diagnostic trouble code (DTC) information.

The hybrid battery assembly consists of 40 individual batteries. Each battery is rated at 7.2 V. The batteries are connected together in a series circuit. The BECM monitors the hybrid battery voltage on every two batteries for a total of 20 locations, across the battery assembly. If a hybrid battery voltage measurement drops below a calibrated value, this DTC will set.