Front Side Door Wiring Conduit Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Conduit Grommet & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .
1	Electrical Connector Procedure Mark the location and the color of the wires to the electrical socket before removing the wires. Disconnect the door wiring harness electrical connector from the body harness. Remove the wiring harness wiring one at a time from the conduit. Remove the wiring harness from the rubber conduit.
2	Conduit Grommet

Callout

Component Name

Preliminary Procedure:
Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .

Electrical Connector

Procedure

Mark the location and the color of the wires to the electrical socket before removing the wires.
Disconnect the door wiring harness electrical connector from the body harness.
Remove the wiring harness wiring one at a time from the conduit.
Remove the wiring harness from the rubber conduit.

Conduit Grommet